jw↗JULES WEBBMECHATRONICS ENGINEERING

CHRISTCHURCH, NEW ZEALAND

Ideas intohardware.Built with intent.

I’m Jules, a mechatronics engineering student building at the intersection of embedded systems, electronics and software.

University of Canterbury
Incoming Integrated Operations Engineering Intern · Rocket Lab

ENGINEERING IN FOCUSFIG. 01 / MECHANICAL
CAD render of the Group 13 line-following robot, showing the chassis, motors and front sensor board CUSTOM MECHANICAL DESIGN BARE-METAL CONTROL · ≈500 Hz
HARDWARE+EMBEDDED SYSTEMS+ROBOTICS+ENGINEERING SOFTWARE

01 / SELECTED WORK

Built to solve.
Designed to understand.

From a custom circuit to a complete robot.
A closer look at the decisions, tools and
iterations behind the projects.

SEVEN PROJECTS. ONE SYSTEMS MINDSET.
01 / ROBOTICS & CONTROLBUILT & TESTED
Line-following robot CAD assemblyGROUP 13 · ENMT221 · 2025

FROM CIRCUIT TO CLOSED LOOP

Autonomous line follower

Custom PCBs, bare-metal control and a wireless Bayesian PID tuning workflow.

Embedded CPCB designPython
02 / HARDWARE PLATFORMIN DEVELOPMENT
KiCad 3D view of the RoboDev signals board design in progressKICAD DESIGN VISUALISATION

A FOUNDATION FOR ROBOTS

RoboDev

An integrated STM32 / ESP32 robotics carrier platform for motors, sensors and connectivity.

KiCadSTM32System architecture
03 / ROBOTICS TOOLINGIN DEVELOPMENT
Robot arena mapping tool displaying measured range observations and the robot trailLOCAL MAPPING & TELEMETRY

MAKE THE ROBOT OBSERVABLE

RoboCup & robot tooling

Teensy firmware, live diagnostics, sensor mapping and route planning for an autonomous robot.

C++PyQtSensor integration
04 / ENGINEERING SOFTWAREIMPLEMENTED
Structural frame analysis showing undeformed and deflected shapes with support reactions

FIRST PRINCIPLES, MADE INTERACTIVE

Structural frame solver

A 2D direct-stiffness engine with visual modelling, deflected shapes and transparent worked solutions.

PythonNumerical methodsPyQt6 / Tkinter
05 / AUTOMATION / CONTROLIMPLEMENTED
0504030201
REQUEST → PLAN → MOVE
ENCODER / PI / INTERLOCKS

A STATE FOR EVERY DECISION

Elevator PLC controller

Five floors, encoder positioning and direction-aware scheduling on an Omron PLC.

PLC / ladder logicPI control
06 / MECHANICAL / AUTOMATIONDESIGNED
X / Y / Z
MECHANICAL SYSTEM
CONCEPTUAL MOTION STUDY

MAKE MOTION DELIBERATE

CNC pick & place

Full mechanical system design. Explore the motion concept ahead of the project imagery.

Mechanical designCNC
07 / EMBEDDED / INTERFACESIMPLEMENTED
STEP COUNTER1,024↗STM32 / LSM6DS / OLED

SMALL SYSTEM. COMPLETE EXPERIENCE.

Embedded step counter

Interrupt-driven sensing, cooperative scheduling and a thoughtful OLED interface.

Embedded CSTM32

University team projects and collaborative hardware work are credited in each case study.

FOLLOW THE SIGNAL / SCROLL TO EXPLORE

A robot is a
conversation.

SENSETCRT5000 / ARRAYCOMPUTEATMEGA / PIDACTUATEH-BRIDGE / MOTORSOBSERVETELEMETRY / TUNINGCLOSED LOOP
01 / 04
01 / SENSING

Read the physical world.

The custom infrared array turns the line into a position signal. Sensor placement and electronics shape everything downstream.

Actual line follower sensor PCB layout
02 / PROCESSING

Make the next decision.

Bare-metal firmware processes the sensor error and computes the motor response. The control loop connects the mathematics to real hardware.

error = target − position;output = Kp · e + Ki · ∫e + Kd · de/dt;drive(left, right);CONTROL CONCEPT / PID
03 / ACTUATION

Turn a signal into motion.

The H-bridge and drivetrain put the command on the track. PCB design, gear geometry and mechanical integration are part of the same system.

Line follower planetary gearbox design
04 / FEEDBACK

Measure. Tune. Repeat.

Wireless telemetry closes the development loop. The Python Bayesian tuner uses the robot’s response to explore PID gains.

Wireless PID tuning tool from the projectExplore the whole build ↗

02 / ENGINEERING YOU CAN TOUCH

Less watching.
More doing.

Real calculations. Real geometry.
Get your hands on the engineering.

03 / THE WAY I THINK

A systems mindset.
A builder’s instinct.

The most interesting engineering happens where disciplines meet.

I’m studying mechatronics at the University of Canterbury, with a focus on embedded systems, robotics, electronics and engineering software. I enjoy working across the full chain: understanding the physical problem, designing the hardware, writing the control logic and building the tools to see what is actually happening.

That same approach has taken me into aerospace engineering data workflows at Rocket Lab, where I worked on CAD/PLM migration and Python automation used in production.

More about me on LinkedIn ↗
01

Physical systems

Mechanical integration, CAD, prototyping and design iteration.

02

Electronics & embedded

Custom circuits, PCB design, microcontrollers and firmware.

03

Control & robotics

PID tuning, sensing, telemetry, mapping and navigation tools.

04

Engineering software

Python automation, numerical analysis and useful desktop interfaces.

04 / BEYOND THE WORKBENCH

Engineering in
the real world.

Bringing the same curiosity and care
to production workflows and
engineering teams.

INCOMING

Integrated Operations Engineering Intern

Rocket Lab

Returning to Rocket Lab for an integrated operations engineering internship.

01
NOV 2025 — JUL 2026

CAD Data Intern

Rocket Lab · Auckland, New Zealand

Supported aerospace CAD/PLM migration from SolidWorks / EPDM to Siemens NX and Teamcenter. Built Python tooling for large-scale engineering data workflows used in production.

Python automationSiemens NXTeamcenterCAD / PLM
02
EDUCATION

Mechatronics Engineering

University of Canterbury · Christchurch, New Zealand

Projects spanning embedded systems, robotics, electronics and structural analysis.

03

05 / NEXT CONVERSATION

Good engineering
starts with curiosity.

Interested in robotics, embedded systems
or engineering tools? Let’s connect.

Connect on LinkedIn ↗